Lexmark CS310 User's Guide - Page 75
Timeouts, Notes, Error Recovery, When Hibernate Timeout on Connection is set to Do - recovery mode
View all Lexmark CS310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Understanding the printer menus Use Timeouts Hibernate Timeout Disabled 1-3 hours 6 hours 1-3 days 1-2 weeks 1 month Timeouts Screen Timeout 15-300 Timeouts Print Timeout Disabled 1-255 Timeouts Wait Timeout Disabled 15-65535 Error Recovery Auto Reboot Reboot when idle Reboot always Reboot never 75 To Set the amount of time the printer waits before it goes into Hibernate mode. Notes: • Disabled is the factory default setting for Class A and Class B printers in all countries except for European Union countries, Switzerland, and Canada. • 3 days is the factory default setting for Class B printers in all European Union countries, Switzerland, and Canada. • When the Hibernate Timer expires, the printer uses Ethernet connection to check the value of "Hibernate Timeout on Connection." • When "Hibernate Timeout on Connection" is set to Do Not Hibernate, the device never automatically hibernates. • When "Hibernate Timeout on Connection" is set to Hibernate, the device follows the value of Hibernate Timeout, except when it is set to Disabled. Set the amount of time (in seconds) the printer waits before returning the display to the Ready state. Note: 30 is the factory default setting. Set the amount of time (in seconds) the printer waits to receive an end‑of‑job message before canceling the remainder of the print job. Notes: • 90 is the factory default setting. • When the timer expires, any partially printed page still in the printer is printed, and then the printer checks to see if any new print jobs are waiting. • Print Timeout is available only when using PCL. This setting has no effect on PostScript emulation print jobs. Set the amount of time (in seconds) the printer waits for additional data before canceling a print job. Notes: • 40 is the factory default setting. • Wait Timeout is available only when the printer is using PostScript emulation. This setting has no effect on PCL emulation print jobs. Set the printer to restart when an error is encountered. Note: "Reboot always" is the factory default setting.