Lexmark CS310 User's Guide - Page 26
Using the Wireless Setup Assistant (Macintosh only)
View all Lexmark CS310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Additional printer setup 26 • Make sure a wireless network adapter installed in your printer is attached and working properly. 1 Click or Start. 2 Click All Programs or Programs, and then select the printer program folder from the list. 3 Select your printer, and then navigate to: Printer Home > Settings > Wireless Setup Utility 4 Follow the instructions on the computer screen. Using the Wireless Setup Assistant (Macintosh only) The Wireless Setup Assistant lets you: • Configure the printer to join an existing wireless network. • Add a printer to an existing ad hoc network. • Change the wireless settings after installation. • Install the printer on additional network computers. Installing the Wireless Setup Assistant 1 Go to the Lexmark Web site at http://support.lexmark.com. 2 Download the latest Wireless Setup Assistant application. 3 Double‑click the downloaded software installer package. 4 Follow the instructions on the computer screen. Launching the Wireless Setup Assistant Notes: • Make sure the printer is turned on. • Make sure a wireless network adapter installed in your printer is attached and working properly. 1 From the Finder, navigate to: Applications > select your printer folder 2 Double‑click Wireless Setup Assistant, and then follow the instructions on the computer screen. Note: If you encounter problems while running the application, then click ? . Connecting the printer to a wireless network using the Embedded Web Server Before you begin, make sure that: • Your printer is connected temporarily to an Ethernet network. • A wireless network adapter is installed in your printer and working properly. For more information, see the instruction sheet that came with your wireless network adapter. 1 Open a Web browser, and then type the printer IP address in the address field.