Linksys WIP300 User Guide - Page 61

Application, Start and End, Protocol, IP Address, Enable, admin, Applications & Gaming

Get Linksys WIP300 - iPhone Wireless VoIP Phone PDF manuals and user guides
UPC - 745883569335
View all Linksys WIP300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

Wireless-G IP Phone If you have a Linksys router, then follow these instructions: 1. On one of your networked computers, open your web browser. 2. Access the Router's Web-based Utility by going to http://192.168.1.1 or the IP address of the Router. 3. A login screen will appear. Leave the User Name field blank. Enter the Router's password (the default is admin) in the Password field. Then click the OK button. 4. Click the Applications & Gaming tab, and then click the Port Range Forwarding tab. 5. For each port range you must specify, enter a different name in the Application field. Then enter the number or range of external port(s) used by the IP Phone. 6. Select the protocol you will be using, UDP. 7. Enter the IP address of the IP Phone. For example, if the IP Phone's IP address is 192.168.1.100, you would enter 100 in the field provided. 8. Repeat steps 5-7 until you have entered all four port ranges for the IP Phone. Application Internet phone 1 Internet phone 2 Internet phone 3 Internet phone 4 Start and End 5060 to 5061 53 to 53 69 to 69 10000 to 20000 Protocol UDP UDP UDP UDP IP Address (IP address of IP Phone) (IP address of IP Phone) (IP address of IP Phone) (IP address of IP Phone) Enable X X X X 9. Check the Enable option for the port services you want to use. 10. When you have completed the configuration, click the Save Settings button. 52 Appendix A: Troubleshooting Common Problems and Solutions

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
Wireless-G IP Phone
52
Appendix A: Troubleshooting
Common Problems and Solutions
If you have a Linksys router, then follow these instructions:
1.
On one of your networked computers, open your web browser.
2.
Access the Router’s Web-based Utility by going to
or the IP address of the
Router.
3.
A login screen will appear. Leave the
User Name
field blank. Enter the Router’s password (the
default is
admin
) in the
Password
field. Then click the
OK
button.
4.
Click the
Applications & Gaming
tab, and then click the
Port Range Forwarding
tab.
5.
For each port range you must specify, enter a different name in the
Application
field. Then enter the
number or range of external port(s) used by the IP Phone.
6.
Select the protocol you will be using,
UDP
.
7.
Enter the IP address of the IP Phone. For example, if the IP Phone’s IP address is 192.168.1.100, you
would enter 100 in the field provided.
8.
Repeat steps 5-7 until you have entered all four port ranges for the IP Phone.
9.
Check the
Enable
option for the port services you want to use.
10.
When you have completed the configuration, click the
Save Settings
button.
Application
Start and End
Protocol
IP Address
Enable
Internet phone 1
5060 to 5061
UDP
(IP address of IP Phone)
X
Internet phone 2
53 to 53
UDP
(IP address of IP Phone)
X
Internet phone 3
69 to 69
UDP
(IP address of IP Phone)
X
Internet phone 4
10000 to 20000
UDP
(IP address of IP Phone)
X