Marantz NA7004 NA7004 User Manual - English - Page 12

ENGLISH Basic operations Symbols used to indicate buttons in this guide Button located on both the main unit and the remote control BUTTON Button only on the main unit Button only on the remote control [BUTTON] ON/STANDBY M-DAX [DIMMER] ON/STANDBY [Input source select] M-DAX This section provides information on basic operations such as settings and playback procedures. For other operations, see the sections below. n Setting the others [Other] (vpage 25) Operations possible during playback Input source switching Preparations Turn to select the input source. Turning the power on Press ON/STANDBY. Power is turned on and the power indicator goes off. NOTE • Power continues to be supplied to some of the circuitry even when the power is in the standby mode. When leaving home for long periods of time, either press ON/STANDBY to turn off the power, or unplug the power cord from the power outlet. • Be sure to stop playback before turning the power off. z1 z1 "M-XPort" appears only when an RX101 wireless receiver is connected to M-XPort. n Completely turning off the power Unplug the power cord from the wall outlet. • The settings made for the various functions may be cleared if the power cord is left unplugged from a power outlet for an extended period of time. Turning the power off Press ON/STANDBY. Power is set to standby and the power indicator lights. Press [Input source select] ([INTERNET RADIO], [MUSIC SERVER], [ONLINE MUSIC], [iPod/USB], [M-XPort], [USB], [OPT/COAX] or [FAVORITE]). M-DAX (Marantz Dynamic Audio eXpander) This function makes up for lost audio content in MP3 or AAC sources (from lossy compression) during playback. Choose one of the following levels for this effect as desired. NOTE • Be sure to stop playback before turning the power off. "High": "Mid": "Low": "Off": Stronger effect Medium effect Weaker effect Deactivated [DIG.OUT] 9