Marantz NA7004 NA7004 User Manual - English - Page 25
The wireless receiver connection, Remote control jacks connection, Remote control connection
View all Marantz NA7004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Getting Started Connections Basic Operations Advanced Operations Information Explanation terms Troubleshooting Specifications Index ENGLISH The wireless receiver connection By connecting a wireless receiver RX101 (sold separately) to this unit, you can receive and playback audio signals from other devices using the Bluetooth Communication Function. • Use a Bluetooth device that is A2DP compatible. • You can also use wireless receiver RX101 as an external IR receiver. • For instructions on the wireless receiver settings, refer to the RX101's operating instructions. Wireless receiver RX101 Remote control jacks connection When you use this unit connected to a Marantz amplifier, this unit receives operation signals sent from the amplifier and operates accordingly. n Connection Use the supplied remote connection cable to connect the REMOTE CONTROL IN terminal of this unit to REMOTE CONTROL OUT terminal of the amplifier. n Setting To use this function, set the "IR Setting" to "Disable". (vpage 22 "Remote control connection") • This setting will disable remote sensor reception of this unit. • To operate the unit, point the remote control at the remote sensor of the amplifier. Remote control connection The unit can be controlled using the remote sensor of RX101 connected to the unit and the Marantz amplifier. Be sure to set "IR=Disable" when controlling in this way. NOTE When making this remote control connection, be sure to set the IR switch of RX101 and the Marantz amplifier that are connected to the unit, to ON. Setting the remote control 1 Turn or press [MENU]. Turns on the Menu settings mode and the Menu appears on the display. (vpage 21 "Menu map") 2 Use ui to select "Other"-"IR Setting"-"Disable", then press [ENTER/MEMO], or p. Bluetooth device (A2DP Compatibility) Remote control unit M-XPort DIGITAL OUT D COAXIAL OPTICAL COAXIAL To use this unit without connecting it to the amplifier, set the IR setting to "Enable". -XPort DIGITAL OUT DIGITAL IN NETWORK IN FLASHER IN RS232C COAXIAL OPTICAL COAXIAL OPTICAL USB OUT REMOTE CONTROL To restore original settings, repeat steps 1 and 2, select "Enable" and press . NOTE The unit cannot be controlled using the remote controller while "Disable" is set. When you connect RX101 to M-XPort on this unit, the function switches to M-XPort. Amplifier Remote connector cord (supplied) Signal flow 22