Marantz SR5003 SR5003 User Manual - English - Page 42

5-1 ZONE SETUP The SR5003 has source selectors, sleep timers and zonespeaker output remote controller for the two other ZONEs in the ZONE system. These features can be set from this menu. 1. Select "5. PREFERENCE" from the MAIN MENU with the 3 or 4 cursor buttons and press the ENTER button. 2. Select "ZONE SETUP" with the 3 or 4 cursor buttons and select either "ZONE A" or "ZONE B" with the 1 or 2 cursor buttons. 3. Press the ENTER button to enter the setting. The following explanation shows how to operate ZONE A of the ZONE system. ZONE A SETUP AUDIO :DVD SLEEP :OFF MONO/ST:STEREO ZONE:OFF SPKR: VOL :VARI VOL : LEV :-90dB LEV : RETURN BACK EXIT The following explanation shows how to operate ZONE B of the ZONE system. ZONE B SETUP AUDIO :DVD(DIG2) SLEEP :OFF ZONE:OFF ZONE: Switch the ZONE output "ON" or "OFF" with the 1 or 2 cursor buttons. SPKR (ZONE SPEAKER): Switch the speaker output "ON" or "OFF" with the 1 or 2 cursor buttons. VOL (VOLUME SETUP): Select whether the ZONE or ZONE speaker output level is variable or fixed with the 1 or 2 cursor buttons. LEVEL (VOLUME LEVEL): Adjust the ZONE output level with the 1 or 2 cursor buttons. The volume can be set between -90 dB and 0 dB in 1 dB increments. Note: • SPKR setting can be changed when the SURR B is set to "NONE" in the SPEAKER SIZE menu and "SPEAKER C" is in the OFF position on the rear panel. When this setting is unavailable, "***" is displayed. • If "VOLUME" is set to "FIXED", the ZONE output level cannot be adjusted from the ZONE A. • SPKR cannot be on the ZONE B. • Functions other than ones that are set to either DIGITAL IN 1-5 or F cannot be selected in ZONE B. There are no MONO/ST, VOL, LEV or SPKR settings for ZONE B. • If OPTICAL is set to REC OUT (See page 38), ZONE B functions cannot be used. 5-2 DC TRIGGER SETUP This unit has DC trigger control jack, which can be used to link with input functions for the main ZONE or ZONE. Each trigger can be setup separately. 1. Select "5. PREFERENCE" from MAIN MENU with the 3 or 4 cursor buttons and press the ENTER button. 2. Select "DC TRIGGER SETUP" with the 3, 4, 1 and 2 cursor buttons. 3. Press the ENTER button to enter the selection. DC TRIGGER SETUP DC TRIG:DISABLE TV : DVD : VCR : DSS : AUX1 : TAPE : CD/R : AUX2 : TUNER : 7.1CH : RETURN NEXT EXIT 4. You can select "MAIN ZONE", "ZONE A", "ZONE B", "REMOTE" or "DISABLE" with the 1 or 2 cursor buttons. Note: • REMOTE is available for the external control. The RC004SR cannot operate the function. 5. Select desired input source with the 3 or 4 cursor buttons. RETURN BACK EXIT 4. Select the desired item with the 3 or 4 cursor button. AUDIO: Select the audio source of the ZONE output with the 1 or 2 cursor buttons. SLEEP: The sleep mode is available when the ZONE is active, set the time with 1 or 2 cursor buttons. The sleep timer can be set to a maximum 120 minutes in 10 minute increments. MONO/ST: This mode switches audio output to the ZONE system between MONAURAL and STEREO, using the 1 and 2 cursor buttons. 6. Set to "ON" or "OFF" with the 1 or 2 cursor buttons. 7. After you complete this portion of the setup, move the cursor to "RETURN" with the 3 or 4 cursor button and press the ENTER button. Note: • When an input source that is on in the set ZONE is selected, voltage is output to the DC TRIGGER output terminal. ENGLISH 39 OTHERS TROUBLESHOOTING ADVANCED OPERATION SETUP ADVANCED CONNECTIONS BASIC OPERATION BASIC CONNECTIONS NAMES AND FUNCTION