Marantz SR5003 SR5003 User Manual - English - Page 78

TECHNICAL SPECIFICATIONS FM TUNER SECTION Frequency Range 87.5 - 108.0 MHz Usable Sensitivity IHF 1.8 µV/16.4 dBf Signal to Noise Ratio Mono/Stereo 75/70 dB Distortion Mono/Stereo 0.2/0.3 % Stereo Separation 1 kHz 45 dB Alternate Channel Selectivity 400 kHz 60 dB Image Rejection 98.1 MHz 70 dB Tuner Output Level 1 kHz, ± 75 kHz Dev 800 mV AM TUNER SECTION Frequency Range 530 - 1710 kHz Signal to Noise Ratio 50 dB Usable Sensitivity Loop 400µV/m Distortion 400Hz, 30 % Mod. 0.5 % Selectivity 20 kHz 70 dB AUDIO SECTION Power Output (20 Hz - 20 kHz/THD=0.08%) Front L&R 8 ohms 90 W / Ch Center 8 ohms 90 W / Ch Surround L&R 8 ohms 90 W / Ch Surround Back L&R 8 ohms 90 W / Ch Front L&R 6 ohms 115 W / Ch Center 6 ohms 115 W / Ch Surround L&R 6 ohms 115 W / Ch Surround Back L&R 6 ohms 115 W / Ch Input Sensitivity/Impedance 180 mV/ 47 Kohms Signal to Noise Ratio(Analog Input / Pure Direct) 105 dB Frequency Response (Analog Input / Pure Direct) 8 Hz - 100 kHz (± 3 dB) (Digital Input / 96 kHz PCM) 8 Hz - 45 kHz (± 3 dB) VIDEO Television Format NTSC Input Level/Impedance 1 Vp-p/75 ohms Output Level/Impedance 1 Vp-p/75 ohms Video Frequency Response .......5 Hz to 8 MHz (- 1 dB) Video Frequency (Component) ....5 Hz to 80 MHz (- 1 dB) S/N 60 dB HDMI Version 1.3a [INPUT 1.3a [OUTPUT] GENERAL Power Requirement AC 120 V 60 Hz Power Consumption 600 W Standby Power Consumption Normal) 0.7 W Economy) 0.4 W Weight 28.8 (13.1) kg ACCESSORIES Remote Controller RC004SR 1 Microphone 1 AAA-size batteries 2 FM Antenna 1 AM Loop Antenna 1 AC cable 1 User Guide 1 Warranty Card (USA x 1, Canada x 1) DIMENSIONS 17-3/8 ins. (440.0 mm) Specifications subject to change without prior notice. 9/16 ins. (14 mm) 11/16 ins. (17.5 mm) 7/8 ins. (22 mm) 5-3/4 ins. (146.5 mm) 6-5/16 ins. (160.5 mm) 13-11/16 ins. (348.5 mm) 15-5/16 ins. (388 mm) ENGLISH CLEANING OF EQUIPMENT EXTERNAL SURFACES The exterior finish of your unit will last indefinitely with proper care and cleaning, Never use scouring pads, steel wool, scourging powders or harsh chemical agents (e.g., lye solution), alcohol, thinner, benzine, insecticide or other volatile substances as these wil mar the finish of the equipment. Likewise, never use cloths containing chemical substances. If the equipment get dirty, wipe the external surfaces with a soft, lint-free cloth. If the equipment becomes heavily soiled: • dilute some washing up liquid in water, in a ratio of one part detergent to six parts water. • dip a soft, lint free in the solution and wring the it is damp. • wipe the equipment with the damp cloth. • dry the equipment by wiping it with a dry cloth. REPAIRS Only the most competent and qualified service technicians should be allowed to service the factory-trained warranty station personnel have the knowledge and special facilities needed for repair and calibration of this precision equipment. After the warranty period has expired, repairs will be performed for a charge if the equipment can be returned to normal operation. In the event of difficulty, refer to your dealer or write directly to the nearest location to you that is listed on the Marantz Authorized Service Station list. If writing, please include the model and serial number of the equipment together with a full description of what you think is abnormal about the equipment's behaviour. 75 OTHERS TROUBLESHOOTING ADVANCED OPERATION SETUP ADVANCED CONNECTIONS BASIC OPERATION BASIC CONNECTIONS NAMES AND FUNCTION