Motorola DCP501 User Guide - Page 124
AM-FM TUNER, Tuned station is
UPC - 612572007839
View all Motorola DCP501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Troubleshooting 115 Problem Possible Solution Radio stations cannot be tuned. Preset radio stations cannot be recalled. Verify that the AM and FM antennas are properly connected, as defined in the "Installation" section. Adjust antenna location. Verify that the DCP501 is within reception range of the desired station. Indoor antennas may not be adequate to receive AM/FM broadcasts in certain geographical locations. An external antenna may be required. No station presets have been entered Station presets have been cleared. AM-FM TUNER RECORDING Tuned station is noisy and full of static. . The VCR does not operate or record properly. . Switch the FM receiver into Mono mode, as defined in the "Operation" section. The AM receiver may be experiencing interference from electrical appliances (e.g. clothes washer). Turn off the appliance while listening to AM broadcasts. Check to make sure that the VCR is properly connected to an AC power outlet and powered on. Verify that the VCR outputs of the DCP501 are properly connected to the inputs of the VCR, and that the outputs of the VCR are properly connected to the VCR inputs of the DCP501, as defined in the "Installation" section. The VCR may not record DVDs since the content may be copy-protected. Make sure that the video cassette is not damaged or of poor quality. Make sure that the plastic erase protection tab on the video cassette has not been broken off. Verify that the remote control unit has been programmed to operate the correct model of VCR that is being used. DCP501 User Guide