Motorola DCP501 User Guide - Page 22

12 Overview Item 36 37 Indicator/Icon Description L, C, and R indicated left, center and right front speakers, respectively. LS and RS indicate left and right surround speakers, respectively. LFE (Low Frequency Effect) indicates the subwoofer. These icons turn on as follows: Each icon turns on to indicate a valid input channel. The LFE icon turns on to indicate a LFE component is present. A box around an icon indicates that the output channel for that speaker has been set. The three-dimensional box behind the boxed icon indicates whether the speaker has been set up as LARGE (the three-dimensional box is turned on, as shown in the example above) or SMALL (the three-dimensional box is not turned on). For more information on speaker settings, see Initial Set-up Operations in the "Operations" section. On indicates Night mode enabled. In Night mode, you can set the DCP501 to dim the display illumination and compresses the audio level to lower volume peaks. Rear Panel Figure 5 illustrates the rear panel of the DCP501: Figure 5 DCP501 rear panel 1 2 34 5 6 78 9 10 11 À LA PLUIE NI À L'HUM IDITE". MODEL NO.: DCP 501 12 13 14 15 16 Refer to the " Installation" section for instructions on installing and cabling the DCP501. DCP501 User Guide