Motorola V3X User Manual - Page 45

13 - Frequently Asked Questions Please visit www.hellomoto.com/motonav for product information on MOTONAV. • Change your password • View user manuals • View an updated version of Frequently Asked Questions • Enter a location for use in MOTONAV Inbox or My Locations • Edit or delete My Locations • Add money to your account If you want to place a call while using MOTONAV: It is possible to place a call while using MOTONAV. On Motorola phones, press the End key twice. You will then be able to place a call from your mobile phone. MOTONAV will be paused and ready to resume when you have finished your call. If you want to upgrade your software: Go to Options > Software Version. You will be notified if a new version of MOTONAV is available for download. If you want to pair more phones to the GPS receiver: The GPS receiver retains up to 8 phones in its history list. Pairing a ninth phone will erase the eighth phone. To reset the history list to zero: press and hold the power button for longer than 10 seconds. Reset is indicated by 2 flashes of the Bluetooth status light. If you need to pair a new GPS receiver to MOTONAV: Once a GPS receiver has been paired to a phone, you must use the following procedure to remove it and pair another receiver. Turn your phone off and then back on. Turn on the new GPS receiver. Go to MOTONAV Menu > Options > Settings > GPS > Search for GPS. After searching for available devices, MOTONAV will connect with the new GPS receiver. If you need to move your UPH after it has been stuck to the dash: You will have to very gently pry off the UPH base from the dash. Clean up any residue with alcohol. Most auto parts stores carry Molding and Trim Tape that can be used as an adhesive. Auto parts stores also carry replacement Velcro tape if your Velcro mount wears out. MOTONAV shows a "No GPRS" message: Your phone is not able to make a wireless data connection at the moment. The system may be busy or you may be out of range. Try again later. 45