NVIDIA FX4500 User Guide - Page 21
house sync signal, Free running internal timing
UPC - 054213211456
View all NVIDIA FX4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Chapter 03 : Windows-Using the Graphics to SDI Control Panel 4 Click the SDI Settings bar to open the SDI Signal Settings dialog box. 5 Choose a method for determining the format of the SDI output ‐ either using internal timing or synchronized to an external signal source. To use internal timing, select Free running (internal timing), then click the list arrow and choose from the list of available SDI signal formats. To synchronize to an external signal source, make sure the house sync is connected to the INPUT BNC connector on the graphics card, then select the Synchronized to a house sync signal radio buttion and set up the synchronization and signal formats as follows: • Select the House sync type radio button (SDI or Composite) that corresponds to the sync signal type you are using. • To synchronize the pixel scanning of the SDI output to the external signal using genlock, select Pixel‐accurate synchronization. • To synchronize the frame rate of the SDI output to the external signal using frame lock, select Frame‐accurate synchronization using this format, then click the list arrow and choose from the list of available SDI signal formats. • To introduce a delay in the SDI output, enter the pixel or line delay values in the appropriate HSYNC or VSYNC delay boxes. Quadro 4000/5000/6000 SDI DU-05337-001_v01 | 17