Netgear C6220 User Manual - All MSOs - Page 12

Power On/Off, LED On-Off, admin, password, ADVANCED &gt, Administration > Router Mode, Apply - bridge mode

Get Netgear C6220 PDF manuals and user guides View all Netgear C6220 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

AC1200 WiFi Cable Modem Router Model C6220 Make sure that the cable is tightly connected. 4. Connect the power adapter to the modem router and plug the power adapter into an electrical outlet. Make sure that the Power On/Off button and the LED On-Off switch on the rear panel of the modem router are in the On position. The startup procedure takes about one minute. When the startup procedure is complete, the Power LED lights green. 5. On your WiFi-enabled computer or mobile device, find and select the WiFi network. The WiFi network name is on the modem router label. 6. Join the WiFi network and enter the WiFi password. The password is on the modem router label. Your WiFi device connects to the WiFi network. 7. Launch a web browser. 8. Type http://routerlogin.net or http://192.168.0.1. A login window opens. 9. Enter the modem router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. 10. When prompted, change the password and enter security questions and answers. The BASIC Home page displays. 11. Select ADVANCED > Administration > Router Mode. The Router Mode page displays. 12. Select the No radio button. With this setting, the modem router works as a bridge and the router behind it obtains a WAN IP address from the Internet service provider. 13. Click the Apply button. Your settings are saved. 14. Follow the instructions that came with your router to connect it to the modem router. Hardware Setup 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
Hardware Setup
12
AC1200 WiFi Cable Modem Router Model C6220
Make sure that the cable is tightly connected.
4.
Connect the power adapter to the modem router and plug the power adapter into an
electrical outlet.
Make sure that the
Power On/Off
button and the
LED On-Off
switch on the rear panel of
the modem router are in the
On
position.
The startup procedure takes about one minute. When the startup procedure is complete,
the Power LED lights green.
5.
On your WiFi-enabled computer or mobile device, find and select the WiFi network.
The WiFi network name is on the modem router label.
6.
Join the WiFi network and enter the WiFi password.
The password is on the modem router label.
Your WiFi device connects to the WiFi network.
7.
Launch a web browser.
8.
Type
http://routerlogin.net
or
.
A login window opens.
9.
Enter the modem router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
10.
When prompted, change the password and enter security questions and answers.
The BASIC Home page displays.
11.
Select
ADVANCED >
Administration > Router Mode
.
The Router Mode page displays.
12.
Select the
No
radio button.
With this setting, the modem router works as a bridge and the router behind it obtains a
WAN IP address from the Internet service provider.
13.
Click the
Apply
button.
Your settings are saved.
14.
Follow the instructions that came with your router to connect it to the modem router.