Netgear DGND3700v2 [English]: DGND3700v2 User Manual(PDF) - Page 108
To set up port triggering, Advanced > Advanced Setup > Port Forwarding/Port Triggering
View all Netgear DGND3700v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2 To set up port triggering, you need to know which inbound ports the application needs. Also, you need to know the number of the outbound port that will trigger the opening of the inbound ports. You can usually determine this information by contacting the publisher of the application or user groups or newsgroups. To set up port triggering: 1. Select Advanced > Advanced Setup > Port Forwarding/Port Triggering. 2. Select the Port Triggering radio button to display the port triggering information. 3. Clear the Disable Port Triggering check box if it is selected. Note: If the Disable Port Triggering check box is selected after you configure port triggering, port triggering is disabled. However, any port triggering configuration information you added to the wireless modem router is retained even though it is not used. 4. In the Port Triggering Timeout field, enter a value up to 9999 minutes. This value controls the inactivity timer for the designated inbound ports. The inbound ports close when the inactivity time expires. This is required because the wireless modem router cannot be sure when the application has terminated. Advanced Settings 108