Netgear GSM5212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 187

ProSafe Managed Switch range is 2-10. The is the delay before re-initialization, and the range is 1-0 seconds. Default Format Mode • interval-30 seconds • hold-4 • reinit-2 seconds lldp timers [interval ] [hold ] [reinit ] Global Config no lldp timers Use this command to return any or all timing parameters for local data transmission on ports enabled for LLDP to the default values. Format Mode no lldp timers [interval] [hold] [reinit] Global Config lldp transmit-tlv Use this command to specify which optional type length values (TLVs) in the 802.1AB basic management set are transmitted in the LLDPDUs. Use sys-name to transmit the system name TLV. To configure the system name, see snmp-server on page 628. Use sys-descto transmit the system description TLV. Use sys-cap to transmit the system capabilities TLV. Use port-desc to transmit the port description TLV. To configure the port description, see description on page 40 Default Format Mode all optional TLVs are included lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc] Interface Config no lldp transmit-tlv Use this command to remove an optional TLV from the LLDPDUs. Use the command without parameters to remove all optional TLVs from the LLDPDU. Format Mode no lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc] Interface Config Switching Commands 187