Netgear GSM5212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 510

ProSafe Managed Switch Term Definition Multicast Packets Transmitted The total number of packets that higher-level protocols requested be transmitted to a Multicast address, including those that were discarded or not sent. Broadcast Packets Transmitted The total number of packets that higher-level protocols requested be transmitted to the Broadcast address, including those that were discarded or not sent. Transmit Packets Discarded The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. A possible reason for discarding a packet could be to free up buffer space. Most Address Entries Ever Used The highest number of Forwarding Database Address Table entries that have been learned by this switch since the most recent reboot. Address Entries The number of Learned and static entries in the Forwarding Database Address Table for Currently in Use this switch. Maximum VLAN Entries The maximum number of Virtual LANs (VLANs) allowed on this switch. Most VLAN Entries Ever Used The largest number of VLANs that have been active on this switch since the last reboot. Static VLAN Entries The number of presently active VLAN entries on this switch that have been created statically. Dynamic VLAN Entries The number of presently active VLAN entries on this switch that have been created by GVRP registration. VLAN Deletes The number of VLANs on this switch that have been created and then deleted since the last reboot. Time Since Counters Last Cleared The elapsed time, in days, hours, minutes, and seconds, since the statistics for this switch were last cleared. show mac-addr-table This command displays the forwarding database entries. These entries are used by the transparent bridging function to determine how to forward a received frame. Enter all or no parameter to display the entire table. Enter a MAC Address and VLAN ID to display the table entry for the requested MAC address on the specified VLAN. Enter the count parameter to view summary information about the forwarding database table. Use the interface parameter to view MAC addresses on a specific interface. Use the vlan parameter to display information about MAC addresses on a specified VLAN. Format Mode show mac-addr-table [{ | all | count | interface | vlan }] Privileged EXEC Utility Commands 510