Netgear GSM5212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 429

ProSafe Managed Switch ipv6 mld router Use this command, in the administrative mode of the router, to enable MLD in the router. Default Format Mode Disabled ipv6 mld router • Global Config • Interface Config no ipv6 mld router Use this command, in the administrative mode of the router, to disable MLD in the router. Default Format Mode Disabled no ipv6 mld router • Global Config • Interface Config ipv6 mld query-interval Use this command to set the MLD router's query interval for the interface. The query-interval is the amount of time between the general queries sent when the router is the querier on that interface. The range for is 1 to 3600 seconds. Default Format Mode 125 ipv6 mld query-interval Interface Config no ipv6 mld query-interval Use this command to reset the MLD query interval to the default value for that interface. Format Mode no ipv6 mld query-interval Interface Config ipv6 mld query-max-response-time Use this command to set the MLD querier's maximum response time for the interface and this value is used in assigning the maximum response time in the query messages that are sent on that interface. The range for is 0 to 65535 milliseconds. Default 10000 milliseconds IPv6 Multicast Commands 429