Netgear GSM5212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 569

ProSafe Managed Switch Format Mode debug ip vrrp Privileged EXEC no debug ip vrrp Use this command to disable VRRP debug protocol messages. Format Mode no debug ip vrrp Privileged EXEC debug ipv6 dhcp Use this command to display "debug" information about DHCPv6 client activities and trace DHCPv6 packets to and from the local DHCPv6 client. Default Format Mode disabled debug ipv6 dhcp Privileged EXEC no ipv6 debug dhcp Use this command to disable the display of "debug" trace output for DHCPv6 client activity. Format Mode no debug ipv6 dhcp Privileged EXEC debug ipv6 mcache packet Use this command for tracing MDATAv6 packet reception and transmission. receive traces only received data packets and transmit traces only transmitted data packets. When neither keyword is used in the command, then all data packet traces are dumped. Vital information such as source address, destination address, packet length, and the interface on which the packet is received or transmitted is displayed on the console. Default Format Mode disabled debug ipv6 mcache packet [receive|transmit] Privileged EXEC no debug ipv6 mcache packet Use this command to disable debug tracing of MDATAv6 packet reception and transmission. Format Mode no debug ipv6 mcache packet [receive|transmit] Privileged EXEC Utility Commands 569