Netgear GSM5212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 262

ProSafe Managed Switch Term Definition Configured Priority The priority configured through the ip vrrp priority command. Advertisement interval The advertisement interval in seconds for the specific virtual router. Pre-Empt Mode The preemption mode configured on the specified virtual router. Administrative Mode The status (Enable or Disable) of the specific router. State The state (Master/backup) of the virtual router. The following shows example CLI display output for the command. (Switch)#show ip vrrp interface 1/0/1 1 Primary IP Address 1.1.1.5 VMAC Address 00:00:5e:00:01:01 Authentication Type None Priority 100 Configured priority 100 Advertisement Interval (secs 1 Pre-empt Mode Enable Administrative Mode Disable Accept Mode Enable State Initialized Track Interface State ------ DecrementPriority down 10 TrackRoute (pfx/len 10.10.10.1/255.255.255.0 State ------ down DecrementPriority 10 show ip vrrp interface brief This command displays information about each virtual router configured on the switch. This command takes no options. It displays information about each virtual router. Format Modes show ip vrrp interface brief • Privileged EXEC • User EXEC Term Interface VRID IP Address Definition Valid slot and port number separated by forward slashes. The router ID of the virtual router. The virtual router IP address. Routing Commands 262