Netgear GSM5212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 484

ProSafe Managed Switch Note: You should be aware that the option may or may not be available, depending on the platform. Format Modes ipv6 traffic-filter [vlan ] [sequence ] • Global Config • Interface Config no ipv6 traffic-filter This command removes an IPv6 ACL identified by from the interface(s) in a given direction. Format Modes no ipv6 traffic-filter [vlan ] in [sequence ] • Global Config • Interface Config show ipv6 access-lists This command displays an IPv6 access list and all of the rules that are defined for the IPv6 ACL. Use the [name] parameter to identify a specific IPv6 ACL to display. Format Mode show ipv6 access-lists [name] Privileged EXEC Term Definition Rule Number The ordered rule number identifier defined within the IPv6 ACL. Action The action associated with each rule. The possible values are Permit or Deny. Match All Indicates whether this access list applies to every packet. Possible values are True or False. Protocol The protocol to filter for this rule. Source IP Address The source IP address for this rule. Source L4 Port The source port for this rule. Keyword Destination IP The destination IP address for this rule. Address Destination L4 Port Keyword The destination port for this rule. Quality of Service (QoS) Commands 484