Netgear GSM5212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 198

ProSafe Managed Switch Example: The following shows example CLI display output for the command. (switch) #show lldp med LLDP MED Global Configuration Fast Start Repeat Count: 3 Device Class: Network Connectivity (switch) # show lldp med interface Use this command to display a summary of the current LLDP MED configuration for a specific interface. indicates a specific physical interface. all indicates all valid LLDP interfaces. Format Mode show lldp med interface { | all} Privileged Exec Term Interface Link ConfigMED OperMED ConfigNotify TLVsTx Definition The interface in a unit/slot/port format. Shows whether the link is up or down. Shows if the LLPD-MED mode is enabled or disabled on this interface Shows if the LLPD-MED TLVs are transmitted or not on this interface. Shows if the LLPD-MED topology notification mode of this interface. Shows whether the interface sends optional TLVs in the LLDPDUs. The TLV codes can be 0 (Capabilities), 1 (Network Policy), 2 (Location), 3 (Extended PSE), 4 (Extended Pd), or 5 (Inventory). Example: The following shows example CLI display output for the command. (Switch) #show lldp med interface all Interface --------1/0/1 1/0/2 1/0/3 1/0/4 1/0/5 1/0/6 1/0/7 1/0/8 1/0/9 1/0/10 1/0/11 1/0/12 Link -----Down Up Down Down Down Down Down Down Down Down Down Down configMED operMED Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled ConfigNotify TLVsTx Disabled 0,1 Disabled 0,1 Disabled 0,1 Disabled 0,1 Disabled 0,1 Disabled 0,1 Disabled 0,1 Disabled 0,1 Disabled 0,1 Disabled 0,1 Disabled 0,1 Disabled 0,1 Switching Commands 198