Netgear GSM5212P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 359

ProSafe Managed Switch using a link-local address as the next hop. A route with a preference of 255 cannot be used to forward traffic. Default Format Mode disabled ipv6 route / { | Null0 | interface { | tunnel } } [] Global Config no ipv6 route Use this command to delete an IPv6 static route. Use the command without the optional parameters to delete all static routes to the specified destination. Use the parameter to revert the preference of a route to the default preference. Format Mode no ipv6 route / [{ | Null0 | interface { | tunnel } | }] Global Config ipv6 route distance This command sets the default distance (preference) for IPv6 static routes. Lower route distance values are preferred when determining the best route. The ipv6 route command allows you to optionally set the distance (preference) of an individual static route. The default distance is used when no distance is specified in this command. Changing the default distance does not update the distance of existing static routes, even if they were assigned the original default distance. The new default distance will only be applied to static routes created after invoking the ipv6 route distance command. Default Format Mode 1 ipv6 route distance Global Config no ipv6 route distance This command resets the default static route preference value in the router to the original default preference. Lower route preference values are preferred when determining the best route. Format Mode no ipv6 route distance Global Config IPv6 Commands 359