Home » Netgear Manuals » Wireless » Netgear WAX220PA » Manual Viewer

Netgear WAX220PA User Manual - Page 25

Log in to the AP after you complete the initial login process

Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Essentials WiFi 6 AX4200 Dual Band Multi-Gig Access Point Model WAX220 server), or dedicated DHCP server to see the devices that are connected to it, including the AP. The IP address that is assigned to the AP is listed. • Option 5: Use a third-party IP scanner. Use an IP scanner application (they are available free of charge on the Internet) in the network of your existing router. The IP scanner results include the IP address that is assigned to the AP. If you made a direct connection to the AP, you can now terminate that connection. Connect your computer or tablet to the same network as the AP, and use the discovered IP address to log in to the AP. Log in to the AP after you complete the initial login process After you complete the initial login process, the AP is ready for use and you can change the settings and monitor the traffic. Depending on how you connect to the AP, when you enter https://www.aplogin.net or the IP address that is assigned to the AP and you use http, the browser automatically redirects your request to https. To log in to the AP's device UI after you complete the initial login process: 1. Launch a web browser from a computer or tablet that is directly connected over WiFi to the AP or connected to the same network as the AP. 2. Enter the IP address that is assigned to the AP. If you are directly connected to the management WiFi network, you can enter https://www.aplogin.net. A login page displays. If you do not know the IP address, see Find the IP address of the AP on page 24. For more information about the management WiFi network, see Management WiFi network on page 43. If your browser displays a security warning, you can proceed, or add an exception for the security warning. For more information, see kb.netgear.com/000062980. 3. Enter the AP login password and click the LOGIN button. The AP login password is the one that you specified the first time you logged in to the AP. The password is case-sensitive. The Dashboard page displays. The Dashboard page displays various panes that let you see the status of your AP at a glance. You can now configure and monitor the AP. Installation and Initial Login 25 User Manual

Section	Page
Contents	3
1. Hardware Overview Model WAX220	7
Additional documentation	8
Unpack the AP	8
Top panel with LEDs	8
Hardware interfaces	10
Label	12
2. Installation and Initial Login	13
Set up the AP in your network	14
Set up the AP with a PoE+ network connection	14
Set up the AP with a non-PoE network connection	15
Initial login process	16
Connect directly to the AP over WiFi and log in for the first time	17
Connect to the AP over the LAN and log in for the first time	20
When to use aplogin.net and when to use the assigned IP address	23
Find the IP address of the AP	24
Log in to the AP after you complete the initial login process	25
Change the language	26
Join a user WiFi network on the AP	26
3. Manage the Wired Network Settings	28
Set a static IPv4 address	29
Reenable the DHCP client of the AP	30
Use an existing management VLAN	31
4. Manage Basic WiFi Settings	33
User WiFi networks	34
Set up or change a user WiFi network with WPA2 or WPA3 personal security	34
Set up or change an open user WiFi network	36
Set up or change a user WiFi network with WPA2 or WPA3 enterprise security	38
Set up or change a guest WiFi network	40
Management WiFi network	43
Change the password for the management WiFi network	43
Disable the idle time-out for the management WiFi network	44
Disable the management WiFi network	45
Change the AP’s device name	46
5. Manage Advanced WiFi Settings	48
Hide the name of a user WiFi network	49
Isolate clients of a user WiFi network without exceptions	50
Isolate clients of a user WiFi network and set exceptions	51
Enable VLAN isolation for a user WiFi network and set a VLAN ID	53
Enable fast roaming	54
Manage access to a user WiFi network based on a client’s MAC address	56
Manually block a WiFi client from a user WiFi network	58
Remove a WiFi client from an access control list	59
Set up a WiFi on/off schedule for a user WiFi network	60
Change the DHCP server settings for guest WiFi networks	62
6. Manage the WiFi Radio Settings	65
Change the country and region of operation	66
Manage the channel high throughput mode	67
Manage the WiFi channels	68
Manage the radio transmit power	70
Change the minimum bit rate	71
Manage client limits	72
Manage the multicast and unicast streams to WiFi clients	74
Manage the 802.11ax mode for the 2.4 GHz radio	75
Enable band steering	76
7. Maintain the AP	78
Update the AP firmware	79
Check for new firmware and update the AP	79
Manage the firmware update settings	80
Manually update the AP firmware	81
Back up or restore the configuration file	82
Back up the AP configuration settings	82
Restore the AP configuration settings	83
Change the AP login password	84
Manage the date and time settings	86
Manage Universal Plug and Play	87
Control the LEDs	88
Restart the AP from the device UI	89
Schedule the AP to automatically restart	90
Reset the AP to factory default settings	91
8. Monitor the AP and its Network Connections	94
Display the AP device, memory, LAN, and WiFi status information	95
Display the WiFi connections	98
Display the CPU, user WiFi network, and LAN traffic loads	100
Scan for neighboring access points and WiFi routers	102
Logs	103
View and manage the system log	103
Set up a remote log server	105
Set up email alerts	106
9. Perform Diagnostics and Troubleshooting	108
Send a ping	109
Send a traceroute request	110
Send a name server lookup request	111
Perform a speed test for the connection to a WiFi client	112
Quick tips for WiFi troubleshooting	113
Troubleshoot with the LEDs	114
Power LED remains off	115
2.4 GHz WLAN LED, 5 GHz WLAN LED, or both WLAN LEDs are off	116
LAN LED is off in a setup with a power adapter	116
Troubleshoot the WiFi connectivity	116
A WiFi device cannot connect to the AP	117
You cannot connect to the management WiFi network	118
Troubleshoot Internet browsing	119
You cannot log in to the AP over a LAN connection	119
Changes are not saved in the device UI	120
Troubleshoot your network using the ping utility of your computer or mobile device	121
Test the LAN path from a Windows-based computer to the AP	121
Test the path from a Windows-based computer to a remote device	122
A. Factory Default Settings and Technical Specifications	123
Factory default settings	124
Technical specifications	126
B. Mount the AP to a Wall or Ceiling	128
Mount the AP to a solid wall	129
Mount the AP to a T-bar	131

Match case Limit results 1 per page

server), or dedicated DHCP server to see the devices that are connected to it,

including the AP. The IP address that is assigned to the AP is listed.

•

Option 5: Use a third-party IP scanner

. Use an IP scanner application (they are

available free of charge on the Internet) in the network of your existing router. The

IP scanner results include the IP address that is assigned to the AP.

If you made a direct connection to the AP, you can now terminate that connection.

Connect your computer or tablet to the same network as the AP, and use the discovered

IP address to log in to the AP.

After you complete the initial login process, the AP is ready for use and you can change

the settings and monitor the traffic.

Depending on how you connect to the AP, when you enter

https://www.aplogin.net

or the IP address that is assigned to the AP and you use http, the browser automatically

redirects your request to https.

To log in to the AP’s device UI after you complete the initial login process:

Launch a web browser from a computer or tablet that is directly connected over WiFi

to the AP or connected to the same network as the AP.

Enter the IP address that is assigned to the AP.

If you are directly connected to the management WiFi network, you can enter

https://www.aplogin.net

A login page displays.

If you do not know the IP address, see Find

the

address

the

on page 24. For

more information about the management WiFi network, see Management

WiFi

network

on page 43.

If your browser displays a security warning, you can proceed, or add an exception

for the security warning. For more information, see kb.netgear.com/000062980

Enter the AP login password and click the

button.

The AP login password is the one that you specified the first time you logged in to

the AP. The password is case-sensitive.

The Dashboard page displays.

The Dashboard page displays various panes that let you see the status of your AP at a

glance. You can now configure and monitor the AP.

User Manual

Installation and Initial Login

Essentials WiFi 6 AX4200 Dual Band Multi-Gig Access Point Model WAX220