Netgear WAX220PA User Manual - Page 86
Manage the date and time settings
View all Netgear WAX220PA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Essentials WiFi 6 AX4200 Dual Band Multi-Gig Access Point Model WAX220 Manage the date and time settings By default, the AP is configured to automatically get the date and time from a Network Time Protocol (NTP) server that is preconfigured. You can also manually set the date and time, configure a time zone, and enable daylight saving time adjustment. To manage the date and time settings: 1. Launch a web browser from a computer or tablet that is directly connected over WiFi to the AP or connected to the same network as the AP. 2. Enter the IP address that is assigned to the AP. If you are directly connected to the management WiFi network, you can enter https://www.aplogin.net. A login page displays. If you do not know the IP address, see Find the IP address of the AP on page 24. For more information about the management WiFi network, see Management WiFi network on page 43. If your browser displays a security warning, you can proceed, or add an exception for the security warning. For more information, see kb.netgear.com/000062980. 3. Enter the AP login password and click the LOGIN button. The AP login password is the one that you specified the first time you logged in to the AP. The password is case-sensitive. The Dashboard page displays. 4. Select Management > Management > Time Zone. The page that displays shows the Date and Time Settings section and the Time Zone section. 5. To configure the date and time, in the Date and Time Settings section, select one of the following radio buttons: • Manually Set Date and Time: Specify the date and time settings by doing one of the following: - Enter the setting manually by doing the following: a. In the Date fields, specify the year, month, and date. b. In the Time fields, specify the hour and minutes. Use 24-hour format. Maintain the AP 86 User Manual