Netgear XCM8810 Chassis User Manual - Page 574

NETGEAR 8800 User Manual To display the state of a port that participates in STP, use the following command: show {stpd} ports {[detail | {detail}]} To display more detailed information for one or more ports in the specified STPD, including participating VLANs, specify the detail option. This command displays the following information: • STPD port configuration • STPD port mode of operation • STPD path cost • STPD priority • STPD state (root bridge, and so on) • Port role (root designated, alternate and so on) • STPD port state (forwarding, blocking, and so on) • Configured port link type • Operational port link type • Edge port settings (inconsistent behavior, edge safeguard setting) • MSTP port role (internal or boundary) If you have MSTP configured and specify the detail option, this command displays additional information: • MSTP internal path cost • MSTP timers • STPD VLAN Settings If you have a VLAN that spans multiple STPDs, use the show vlan stpd command to display the STP configuration of the ports assigned to that specific VLAN. The command displays the following: • STPD port configuration • STPD port mode of operation • STPD path cost • STPD priority • STPD state (root bridge, and so on) • Port role (root designated, alternate and so on) • STPD port state (forwarding, blocking, and so on) • Configured port link type • Operational port link type 574 | Chapter 18. STP