Nikon 25214 D70 User's Guide - Page 119

Taking Photographs-Using a Remote Control 4 Aim the transmitter on the ML-L3 at the infrared receiver on the camera and press the shutter-release button on the ML-L3 (when using the remote outdoors, make sure that the line of site between the transmitter and the infrared receiver is not blocked by the lens or other obstacles). How the camera focuses and shoots depends on the option selected for Custom Setting 2 (Autofocus; 139). Infrared receiver Approx. 5 m (16´) Shooting mode Custom Setting 2 AF-S (Single-servo AF) AF-C (Continuous-servo AF) Once camera has focused, self- timer lamp will blink for 2 s before Self-timer lamp blinks for 2 s beDelayed shutter is released. If unable to fo- fore shutter is released. Camera remote cus, camera will return to standby does not focus. without releasing shutter. Shutter is released immediately after camera focuses. Self-timer Camera releases shutter immediQuick- lamp will flash when shooting ately without focusing. Self-timer response is complete. If unable to focus, lamp will flash when shooting is remote camera will return to standby complete. without releasing shutter. The camera will not adjust focus in manual focus mode or if autofocus has been set using the shutter-release button on the camera. To return to single-frame or continuous shooting mode, turn the camera off or rotate the mode dial to another setting. The shooting mode in effect before remote control mode was selected will also be restored if no operations are performed for the time selected for Custom Setting 25 (Remote; 154). The default setting is one minute. 109