Nikon 25214 D70 User's Guide - Page 207

Technical Notes-Caring for the Camera, Notes on the monitor

Page 207 highlights

Technical Notes-Caring for the Camera • Do not store the camera with naphtha or camphor moth balls, close to equipment that produces strong magnetic fields, or in areas subject to extremes of temperature, for example near a space heater or in a closed vehicle on a hot day. • To prevent mold or mildew, take the camera out of storage at least once a month. Turn the camera on and release the shutter a few times before putting the camera away again. • Store the battery in a cool, dry place. Replace the terminal cover before putting the battery away. Notes on the monitor • The monitor may contain a few pixels that are always lit or that do not light. This is a characteristic common to all TFT LCD monitors and does not indicate a malfunction. Images recorded with the product will not be affected. • Images in the monitor may be difficult to see in a bright light. • Do not apply pressure to the monitor; this could cause damage or malfunction. Dust or lint on the monitor can be removed with a blower. Stains can be removed by rubbing the surface lightly with a soft cloth or chamois leather. • Should the monitor break, care should be taken to avoid injury due to broken glass and to prevent the liquid crystal from the monitor touching the skin or entering the eyes or mouth. • Replace the monitor cover when transporting the camera or leaving it unattended. Turn the product off before removing or disconnecting the power source Do not unplug the product or remove the battery while the product is on, or while images are being recorded or deleted. Forcibly cutting power to the product in these circumstances could result in loss of data or in damage to product memory or internal circuitry. To prevent an accidental interruption of power, avoid carrying the product from one location to another while the AC adapter is connected. Batteries • When you turn the device on, check the battery-level displayed in the control panel to determine whether the battery needs to be recharged or replaced. The battery needs to be recharged or replaced when the battery-level indicator is flashing. • Ready a spare battery and keep it fully charged when taking photographs on important occasions. Depending on your location, you may find it difficult to purchase replacement batteries on short notice. • On cold days, the capacity of batteries tends to decrease. Be sure the battery is fully charged before taking photographs outside in cold weather. Keep a spare battery in a warm place and exchange the two as necessary. Once warmed, a cold battery may recover some of its charge. • Should the battery terminals become dirty, wipe them off with a clean, dry cloth before use. • After removing the battery from the camera, be sure to replace the terminal cover. • Used batteries are a valuable resource. Please recycle used batteries in accord with local regulations. 197

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218

197
Technical Notes—Caring for the Camera
• Do not store the camera with naphtha or
camphor moth balls, close to equipment
that produces strong magnetic fields, or in
areas subject to extremes of temperature,
for example near a space heater or in a
closed vehicle on a hot day.
• To prevent mold or mildew, take the cam-
era out of storage at least once a month.
Turn the camera on and release the shut-
ter a few times before putting the camera
away again.
• Store the battery in a cool, dry place.
Re-
place the terminal cover before putting
the battery away.
Notes on the monitor
• The monitor may contain a few pixels that
are always lit or that do not light.
This is
a characteristic common to all TFT LCD
monitors and does not indicate a malfunc-
tion.
Images recorded with the product
will not be affected.
•Images in the monitor may be diffi
cult to
see in a bright light.
• Do not apply pressure to the monitor; this
could cause damage or malfunction.
Dust
or lint on the monitor can be removed
with a blower.
Stains can be removed
by rubbing the surface lightly with a soft
cloth or chamois leather.
• Should the monitor break, care should be
taken to avoid injury due to broken glass
and to prevent the liquid crystal from the
monitor touching the skin or entering the
eyes or mouth.
• Replace the monitor cover when trans-
porting the camera or leaving it unat-
tended.
Turn the product off before removing or dis-
connecting the power source
Do not unplug the product or remove the
battery while the product is on, or while
images are being recorded or deleted.
Forc-
ibly cutting power to the product in these
circumstances could result in loss of data or
in damage to product memory or internal
circuitry. To prevent an accidental inter-
ruption of power, avoid carrying the product
from one location to another while the AC
adapter is connected.
Batteries
• When you turn the device on, check the
battery-level displayed in the control panel
to determine whether the battery needs
to be recharged or replaced.
The battery
needs to be recharged or replaced when
the battery-level indicator is flashing.
• Ready a spare battery and keep it fully
charged when taking photographs on im-
portant occasions.
Depending on your lo-
cation, you may find it difficult to purchase
replacement batteries on short notice.
• On cold days, the capacity of batteries
tends to decrease.
Be sure the battery is
fully charged before taking photographs
outside in cold weather.
Keep a spare
battery in a warm place and exchange the
two as necessary.
Once warmed, a cold
battery may recover some of its charge.
• Should the battery terminals become dirty,
wipe them off with a clean, dry cloth be-
fore use.
• After removing the battery from the cam-
era, be sure to replace the terminal cover.
• Used batteries are a valuable resource.
Please recycle used batteries in accord
with local regulations.