Nikon 25214 D70 User's Guide - Page 180

Connections-Television Playback Television Playback Connecting the Camera to a Video Device The supplied EG-D100 video cable can be used to connect the D70 to a television or VCR for playback or recording. 1 Turn the camera off. The EG-D100 Turn the camera off before connecting or disconnecting the EG-D100. 2 Open the cover protecting the video-out and DC-in connectors. DC in Video out 3 Connect the EG-D100 as shown. Connect to video device 4 Tune the television to the video channel. Connect to camera 5 Turn the camera on. The image normally shown in the monitor will be displayed on the television or recorded to video tape. The camera monitor will remain blank, but the camera will function normally in all other respects. Use an AC Adapter Use of an EH-5 AC adapter (available separately) is recommended for extended playback. When the EH-5 is connected, the camera monitor-off delay will be fixed at ten minutes and the exposure meters will no longer turn off automatically. Video Output ( 162) Be sure that the video standard matches the standard used in the video device. Note that resolution will drop when images are output on a PAL device. 170