Nikon COOLPIX S9400 Reference Manual - Page 142
Connecting the Camera to a Printer (Direct Print), Connecting the Camera to a Printer - charging cable
View all Nikon COOLPIX S9400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Connecting the Camera to a Printer (Direct Print) Users of PictBridge-compatible (F23) printers can connect the camera directly to the printer and print pictures without using a computer. Connecting the Camera to a Printer 1 Turn off the camera. 2 Turn on the printer. • Check the printer settings. 3 Connect the camera to the printer using the included USB cable. • Be sure that the plug is oriented correctly. When disconnecting the cable, do not pull the plug at an angle. 4 The camera is automatically turned on. • When connected correctly, the PictBridge startup screen (1) is displayed on the monitor screen of the camera. Then the Print selection screen (2) is displayed. Print selection 15/05/2013 No. 31 [ 32] B If the PictBridge Startup Screen Is Not Displayed Turn the camera off and disconnect the USB cable. Set the Charge by computer option (E80) in the camera's setup menu to Off and reconnect the cable. B Notes on Power Source • When connecting the camera to a printer, use a fully charged battery to prevent the camera from turning off unexpectedly. • If the AC Adapter EH-62F (available separately) (E99) is used, the COOLPIX S9500/S9400 can be powered from an electrical outlet. Do not, under any circumstances, use an AC adapter other than the EH-62F. Failure to observe this precaution could result in overheating or damage to the camera. E22 Reference Section