Nikon COOLPIX S9400 Reference Manual - Page 229
Shooting Issues, Close-up, AF assist, Continuous H: 120 fps, HS 240/8×
View all Nikon COOLPIX S9400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
Troubleshooting Problem Cause/Solution A Monitor is turned Battery temperature is high. Turn off camera, and allow battery to off, and the power- cool down before resuming use. After the lamp flashes for 3 on lamp flashes minutes, the camera turns off automatically, but you can also 19 quickly. press the power switch to turn it off manually. Camera temperature rises. When functions such as movie recording or sending images using an Eye-Fi card are used for a long time, or when the camera is used in a location with a high ambient temperature, the 84 camera temperature may rise. This is not a malfunction. Shooting Issues Problem Cause/Solution A Cannot set to shooting mode. Disconnect the HDMI cable or USB cable. 77, 80, E20, E22 • When the camera is in playback mode, press the c button, 28 b (e movie-record) button or shutter-release button. No picture can be taken. • When menus are displayed, press the d button. • Battery is exhausted. • When flash lamp flashes, wait until flash has charged. 6 18 50 • Camera and smart device are connected using Wi-Fi 93 connection and the camera is operated by remote control. Cannot take 3D images In some shooting conditions, such as when the subject moves or the subject is dark or low in contrast, the second shot may not be - taken or the 3D image may not be saved. Camera cannot focus. • Subject is too close to the camera. Try shooting with Macro mode, x (Scene auto selector) or Close-up scene mode. • The intended subject is one with which autofocus does not perform well. • Set AF assist in the setup menu to Auto. • Subject is not in focus area when shutter-release button is pressed halfway. • Turn camera off and then on again. 34, 39, 54 68 97, E75 26, 62 19 Colored stripes appear on the monitor when shooting. Colored stripes may appear when shooting subjects with repeating patterns (such as window blinds); this is not a malfunction. The colored stripes will not appear in captured images or - recorded movies. However, when using Continuous H: 120 fps, HS 240/8× or HS 480/4×, the colored stripes may be seen in the captured images and recorded movies. Technical Notes and Index F9