Nikon COOLPIX S9400 Reference Manual - Page 183
Notes on Log Recording, To Erase Log Data, Record GPS data, GPS options, Reset all, Erase log - battery exhausted
View all Nikon COOLPIX S9400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
GPS Options Menu (COOLPIX S9500 only) B Notes on Log Recording • If the date and time are not set, the log cannot be recorded. • Use a fully charged battery to prevent the camera from turning off during log recording. When the battery power becomes exhausted, log recording ends. • Log recording ends due to the operations below even when there is time remaining for log recording. - The USB cable is connected. - Record GPS data in GPS options is set to Off (same as when Reset all is performed). - The setting of the internal clock (time zone or date and time) is changed. • Even when the camera is turned off, log recording is continuously performed until the preset time has elapsed if there is still time remaining for log recording. • The log data is temporarily stored in the camera. New logs cannot be recorded if the log data remains in the camera. After recording log data, save it to a memory card. • See "GPS Log Data Saved on Memory Cards" (E98) for more information. C To Erase Log Data • To erase the log data that is temporarily stored in the camera, select Erase log in step 4. • To erase the log data that is stored on the memory card, press the l button in View log (E64). E63 Reference Section