Nikon D2H D2H User's Manual - Page 116

Taking Photographs-Exposure 4 Compose a photograph, focus, and shoot. Each shot will be processed to create the number of copies specified in the bracketing program, and each copy will have a different white balance. Modifications to white balance are added to the white balance adjustment made with white balance fine-tuning ( 54). To cancel bracketing, press the button and rotate the main command dial until the number of shots in the bracketing sequence is zero and white-balance bracketing indicators are no longer displayed in the control panels and viewfinder. The program last in effect will be restored the next time bracketing is activated. Bracketing can also be cancelled by selecting NEF (Raw), NEF+JPEG Fine, NEF+JPEG Normal, or NEF+JPEG Basic for image quality or by performing a two-button reset ( 128), although in this case the bracketing program will not be restored the next time bracketing is activated. White Balance Bracketing White balance bracketing is not available at white-balance settings of (Choose color temp.) or (preset) or at an image quality of NEF (Raw), NEF+JPEG Fine, NEF+JPEG Normal, or NEF+JPEG Basic. Selecting any of these options cancels white balance bracketing. Shooting Mode In single frame and self-timer modes, the number of copies specified in the white balance program will be created each time the shutter is released. In continuous low speed and continuous high speed modes, only one shot will be taken each time the shutter-release button is pressed. Each shot will be processed to create the number of copies specified in the bracketing program. Turning the Camera Off If the camera is turned off while the camera before all photographs in a white-balance bracketing sequence have been recorded, the camera will power off only after all photographs in the sequence have been recorded. To turn the camera off without recording the remaining photographs, press the button while turning the camera off (keep the button pressed for at least one second after turning the camera off). e8-Auto BKT Selection ( 198) If desired, the main command dial can be used to turn bracketing on and off and the sub-command dial to select both the number of shots and the white-balance increment. 104