Nikon D2H D2H User's Manual - Page 72
Direct sun, light, Presets measured
UPC - 018208252084
View all Nikon D2H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
4 If the camera was able to measure a value for white balance, will flash for about three seconds in the control panels, while the viewfinder will show a flashing . Taking Photographs-White Balance Rear control panel Viewfinder Top control panel If lighting is too dark or too bright, or if some types of artificial lighting are used when measuring white balance using the ambient light sensor, the camera may be unable to measure white balance. A flashing will appear in the control panels and viewfinder for about three seconds. Return to Step 3 and measure white balance again. If the camera is unable to measure white balance using the ambient light sensor, try measuring white balance using a neutral gray or white reference object. Top control panel Rear control panel Viewfinder The new value for white balance will be stored in preset d-0, automatically replacing the previous value for this preset (no confirmation dialog will be displayed). If white balance was set using a reference object, a thumbnail will be displayed in the preset white balance list. Presets measured using the ambient light sensor are marked by a icon. SHOOTING MENU Select Set d-0 d-1 d-2 SHOOTING MENU Select Set d-0 d-1 d-2 To use the new value for white balance, select preset d-0 (if no value has been measured for white balance before d-0 is selected, white balance will be set to a color temperature of 5,200 K, the same as Direct sunlight). The new white balance value will remain in preset d-0 until white balance is measured again. By copying preset d-0 to one of the other presets before measuring a new value for white balance, up to five white balance values can be stored ( 64). 60