Nikon D2H D2H User's Manual - Page 213
Custom Setting f4, FUNC. Button
UPC - 018208252084
View all Nikon D2H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
Menu Guide-Custom Settings Custom Setting f4: FUNC. Button This option controls the function performed by the FUNC. button. Highlight f4 FUNC. Button in the second level of the CSM menu ( 172) and press the multi selector to the right. Press the multi selector up or down to highlight an option, then press to the right to make a selection. CSM MENU f4 Assign FUNC. Button FV Lock OK FV Lock/Lens data 1 step spd/apeture Same as AE-L/AF-L Flash off Bracketing burst Option Description FV Lock If SB-800 Speedlight is attached, flash value locks while FUNC. button (default) is pressed. If SB-800 Speedlight is attached and on, flash value locks while FUNC. FV Lock/ button is pressed. Otherwise focal length of non-CPU lens can be set Lens data with FUNC. button and main command dial, maximum aperture with FUNC. button and sub-command dial ( 124). 1 step If FUNC. button is pressed when rotating command dials, changes to spd/ shutter speed (exposure modes S and M) and aperture (exposure modes aperture A and M) are made in increments of 1 EV. Same as AE-L/AF-L FUNC. button performs same functions as AE-L/AF-L button. To temporarily disable flash, press shutter-release button while FUNC Flash off button is pressed. While FUNC. button is pressed, all shots in exposure or flash bracketing program will be taken each time shutter-release button is pressed. In continuous high-speed and continuous low-speed modes, camera will Bracket- repeat bracketing burst while shutter-release button is held down. If ing burst white-balance bracketing is selected, camera will take photos at up to 8 fps (single or continuous high-speed mode) or 1-7 fps (continuous lowspeed mode) and perform white balance bracketing on each frame. Matrix metering Matrix metering activated while FUNC. button is pressed. Centerweighted Center-weighted metering activated while FUNC. button is pressed. Spot metering Spot metering activated while FUNC. button is pressed. 201