Nikon D2H D2H User's Manual - Page 182

Menu Guide-Custom Settings Custom Settings Fine-Tuning Camera Settings Custom settings are used to fine-tune a variety of camera settings to suit the user's preferences, creating combinations of settings that differ from the factory defaults in effect at the time your camera was purchased. In addition to Custom Settings C (Bank select) and R (Menu reset), settings in the CSM (Custom Settings) menu are divided into the following six groups: CSM MENU C Bank select A R Menu reset a Autofocus b Metering/Exposure c Timers/AE&AF Lock d Shooting/Display e Bracketing/Flash f Controls Group a Autofocus b Metering/Exposure c Timers/AE&AF Lock d Shooting/Display e Bracketing/Flash f Controls Custom Settings a1-a8 b1-b6 c1-c5 d1-d7 e1-e8 f1-f7 Press the multi selector up or down to highlight CSM MENU the desired group and then press the multi selector to the right. The full list of Custom Settings a1-f7 will be displayed, starting with the settings in the selected group. To select a setting in a different group, press the multi selector up or down scroll until the desired setting is displayed, a1 AF-C mode priority a2 AF-S mode priority a3 Group dynamic AF a4 Disable Lock-On ON a5 AF activation ON a6 Focus area Illum a7 Focus area OFF a8 Vertical AF-ON or press the multi selector to the left to return the top menu and select a different group. Custom Setting a1 (AF-C mode pri- ority) and f7 (No CF card?) are linked: pressing the multi selector up when Custom Setting a1 is highlighted displays Custom Setting f7, while pressing the multi selector down while Custom Setting f7 is highlighted displays Cus- tom Setting a1. Using the Multi Selector The multi selector can be used at any time when the monitor is on. The focus selector lock switch only takes effect when the monitor is off. 170