Nikon D2H D2H User's Manual - Page 247

Technical Notes-Optional Accessories Remote The D2H is equipped with a ten-pin remote terminal terminal for remote control and automatic accessories photography. The terminal is provided with a cap, which protects the contacts when the terminal is not in use. The following accessories can be used: Accessory Description Length* Remote shutter release; can be used to reduce camera MC-20 shake. Equipped with time-exposure and timer features, 80 cm Remote Cord emitting a beep once a second while the shutter is open. (2´7˝) MC-21 Extension Cord Can be connected to MC-series 20, 22, 25, or 30. 3 m (9´10˝) Remote shutter release with blue, yellow, and black termi- MC-22 nals for connection to a remote shutter-triggering device, 1 m Remote Cord allowing control via sound or electronic signals. (3´3˝) MC-23 Connecting Cord Connects two D2H cameras for simultaneous operation. 40 cm (1´4˝) Ten-pin to two-pin adapter cord for connection to devices MC-25 with two-pin terminals, including the MW-2 radio control 20 cm Adapter Cord set, MT-2 intervalometer, and ML-2 modulite control set. (8˝) MC-30 Remote shutter release; can be used to reduce camera 80 cm Remote Cord shake or keep the shutter open during a time exposure. (2´7˝) ML-2 Modulite Allows infrared remote control at ranges of up to 100 m Remote (328´). Use multiple units for remote control over greater - Control Set distances. Requires MC-25 adapter cord. ML-3 Modulite Remote Allows infrared remote control at ranges of up to 8 m Control Set (26´). - * All figures are approximate. 235