Nikon D2H D2H User's Manual - Page 195

Menu Guide-Custom Settings Highlight b1 ISO auto in the second level of the CSM menu ( 171) and press the multi selector to the right. Press the multi selector up or down to highlight an option, then press to the right to make a selection. Option Description Off Sensitivity remains fixed at value selected by user, regardless of whether (default) optimal exposure can be achieved at current exposure settings. When optimal exposure can not be achieved at sensitivity selected by user, sensitivity is adjusted to compensate, to minimum approximately equivOn alent to ISO 200 and maximum approximately equivalent to ISO 1600. Sensitivity can not be set to HI-1 or HI-2 while this option is in effect. When On is selected, the rear controlpanel display shows ISO-AUTO. ISO-A appears in the viewfinder sidebar. Custom Setting b2: ISO Step Value This option determines whether adjustments to CSM MENU sensitivity (ISO equivalency) are made in incre- b2 ISO step value ments equivalent to 1/3 EV (1/3 step, the default option), ½ EV (1/2 step), or 1 EV (1 step). Highlight b2 ISO step value in the second level of the 1/3 step OK 1/2 step CSM menu ( 171) and press the multi selector 1 step to the right. Press the multi selector up or down to highlight an option, then press to the right to make a selection. Bank Select If a shooting menu bank in which ISO has been set to or is chosen after On is selected for Custom Setting b1, sensitivity (ISO equivalency) will not be adjusted automatically. Sensitivity will also not be adjusted automatically if a Custom Settings bank in which On is selected for Custom Setting b1 is chosen after ISO has been set to or . CH Mode When Custom Setting b1 (ISO auto) is on and sensitivity is altered from the value selected by the user, the maximum shooting speed in CH (continuous high-speed) mode is seven frames per second. 183