Nikon D3000 D3000 User's Manual - Page 102
Measure white balance., Check the results., return to shooting mode immediately, press
UPC - 018208254620
View all Nikon D3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
When the camera is ready to measure white balance, a flashing D (L) will appear in the viewfinder and information display. 5 Measure white balance. Before the indicators stop flashing, frame the reference object so that it fills the viewfinder and press the shutter-release button all the way down. No photograph will be recorded; white balance can be measured accurately even when the camera is not in focus. 6 Check the results. If the camera was able to measure a value for t white balance, the message shown at right will be displayed and a will flash in the viewfinder for about eight seconds before the camera returns to shooting mode. To return to shooting mode immediately, press the shutter-release button halfway. If lighting is too dark or too bright, the camera may be unable to measure white balance. A message will appear in the information display and a flashing b a will appear in the viewfinder for about eight seconds. Return to Step 4 and measure white balance again. 84