Nikon D3000 D3000 User's Manual - Page 202
monitor; if underexposed, adjust settings and try, Change flash mode setting on optional flash unit
UPC - 018208254620
View all Nikon D3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
Indicator Monitor Viewfinder Solution 0 This card is not formatted. T Format card or turn camera off and insert new Format card? (blinks) memory card. 21 • Reduce quality or size. 50 Card is full j • Delete photographs. (blinks) 33, 101 • Insert new memory card. 20 - ● Camera can not focus using autofocus. Change 28, (blinks) composition or focus manually. 42, 48 • Use a lower ISO sensitivity 62 • Use commercial ND filter - Subject is too bright. q • In mode: S Increase shutter speed 69 A Choose a smaller aperture (larger f-number) 70 • Use a higher ISO sensitivity 62 • Use flash 58 Subject is too dark. r • In mode: S Lower shutter speed 69 A Choose a larger aperture (smaller f-number) 70 A No Bulb in S mode. (blinks) & Change shutter speed or select manual exposure mode. 69, 71 (blinks) Flash has fired at full power. Check photo in - monitor; if underexposed, adjust settings and try - N again. Flash is in TTL mode. Choose another setting or use a CPU lens. (blinks) Change flash mode setting on optional flash unit or use CPU lens. 157 • Use the flash. 58 • Change distance to subject, aperture, flash 61, range, or ISO sensitivity. 62, 70 - • Optional SB-400 flash unit attached: flash is in - N/s (blinks) bounce position or focus distance is very short. Continue shooting; if necessary, increase focus distance to prevent shadows from appearing in photograph. Error occurred updating firmware for optional Flash error flash unit. Contact Nikon-authorized service - representative. n 184