Nikon FSA02911 Instruction Manual - Page 13
Adjusting the flash head / Selecting the distance scale
UPC - 018208047109
View all Nikon FSA02911 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Adjusting the flash head / Selecting the distance scale Adjusting the flash head Hold down the flash head tilting/rotating lock release button while adjusting the flash head to the horizontal/front position. • The flash head tilts/rotates from the horizontal/front position to: 90° (up) -7° (down) 180° (left) 90° (right) • The flash head has click stops at 30°, 60° and 90° (to the right), 30°, 60°, 90° 120°, 150° and 180° (to the left), -7° (down), and 45°, 60°, 75° and 90° (up). • When the = button is pressed for approx. 0.5 sec. after adjusting the flash head to the horizontal/front position, the power turns on and the flash shooting range indicator bars _ appear on the LCD panel. They do not appear if the flash head is adjusted to a position other than the horizontal/front position. • The indicator bars _ blink when the flash head is tilted down to -7°. Selecting the distance scale (meters/feet) Set the distance scale on the LCD panel to either meters (m) or feet (ft). 1 Press the = button for approx. 0.5 sec. to turn the SB-28 off. 2 Hold down the . button as you press the = button. -To return to the former setting, repeat steps 1 and 2. m (meters) display ft (feet) display • The SB-28 is preset to meters (m) when the SB-28 is shipped from the factory. NOTE Although meters (m) and feet (ft) appear together in this manual for ease of explanation, they do not appear simultaneously on the SB-28's LCD panel. 13