Nikon FSA02911 Instruction Manual - Page 20
Other camera/lens combinations
UPC - 018208047109
View all Nikon FSA02911 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Adjusting the zoom-head position NOTE To cancel automatic zoom-head positioning and set the position manually: 1 Press the ' and { buttons simultaneously for approx. 2 sec. until the small M above ZOOM starts blinking. Then press the ' button and set the desired zoom-head position manually. 2 The zoom-head position indicator changes every time you press the ' button: 24mm 28mm 35mm 50mm 70mm 85mm Once set manually, the zoom-head position is locked and does not change even when the power is turned off and on again or the lens is changed. -To resume automatic zoom-head position adjustment, press the ' and { buttons simultaneously for approx. 2 sec. until the small M above ZOOM disappears. Other camera/lens combinations Press the ' button and adjust the zoom-head position manually to match the focal length of the lens in use. • The indicator changes each time you press the ' button: 24mm 28mm 35mm 50mm 70mm 85mm When set manually, a small M appears above the ZOOM on the LCD panel. -When using a Zoom-Nikkor lens, set the zoom-head position on the SB-28 to correspond to the shortest focal length of the lens (for example, select the 28mm setting when using a Zoom-Nikkor 28-85mm lens). Then, the flash will cover all the focal lengths. 20