Nikon FSA02911 Instruction Manual - Page 50

Manual Flash ƒ Mode For F5, F100, F90X/N90s, F90-Series/N90 only Flash settings 4 Select the flash mode. -Press the µ button until ƒ appears on the LCD panel. 5 Set % on the LCD panel. -Press the { or } button until % appears on the LCD panel. The indicator bar ¡ on the LCD panel changes to show the shooting distance. The indicator changes every time you press the } button: 1/1(0.0) 1/2(0.0) 1/2(-0.3) 1/2(-0.7) 1/4(0.0) 1/64(0.0) % The indicator changes every time you press the { button: % 1/64(0.0) 1/64(+0.3) 1/64(+0.7) 1/32(0.0) 1/2(0.0) 1/1(0.0) 6 Wait for the ready-light to come on and make sure the subject is in focus before taking the picture. • A small amount of underexposure may result in a more pleasing photograph by shooting a subject which is further to the right by 1 or 2 steps from the distance represented by the indicator bar ¡ on the LCD panel. • If the flash-to-subject distance does not match the appropriate shooting distance shown by the indicator bar ¡, choose a different setting for the zoom-head position (smaller than the focal length of the lens in use) or move closer to or farther away from the subject. 50