Nikon FSA02911 Instruction Manual - Page 52
Repeating Flash
UPC - 018208047109
View all Nikon FSA02911 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Repeating Flash " Mode For cameras in all groups In the " mode, the SB-28 fires repeatedly during a single exposure, creating stroboscopic multiple-exposure effects. This mode is useful when shooting fast-moving subjects. Flash settings 1 Select the flash mode. -Press the µ button until ƒ " appear on the LCD panel. 2 Set the flash output level, the frequency (Hz), and the number of repeating flashes per frame. • Referring to the table on page 53, set the flash output level, the frequency, and the number of repeating flashes per frame separately. -Press the [ button until the flash output level starts blinking, then press the { or } button to set the desired flash output level. Finally, press the [ button to stop the flash output level from blinking. -Repeat the procedures above to set the frequency and the number of repeating flashes per frame. • The numbers blink during adjustment and stop after 8 seconds unless the [ button is pressed. The non-blinking number is the one automatically set. Frequency (Hz) Flash output level Number of repeating flashes per frame 52