Nikon FSA02911 Instruction Manual - Page 15
Turning the SB-28 on and off / Standby function
UPC - 018208047109
View all Nikon FSA02911 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Turning the SB-28 on and off / Standby function Turning power on and off To turn the SB-28 on and off, depress and hold the = button for approx. 0.5 sec. Standby function If both the SB-28 and camera are not used for after approx. 80 seconds, the SB-28 shuts off automatically to conserve battery power. This is called the standby function. Canceling and setting the standby function 1 Press the = button for approx. 0.5 sec. to turn the SB-28 off. 2 Hold down the µ button as you press the = button. -The SB-28's standby mode indicator : on the LCD panel appears when the function is set and disappears when it is not set. Perform steps 1 and 2 to cancel it or reset it. • The standby function is preset when the SB-28 is shipped from the factory. (Check that the standby mode indicator : appears on the LCD panel when the SB-28 is turned on.) When carrying the SB-28 in your camera bag with the standby function set, make sure to turn off the flash unit to avoid accidental battery drain. To turn the SB-28 on again after it enters the standby mode, you can: • Lightly press the shutter release button (except cameras in Group VII). • Press the ~ button on the SB-28. • Press the SB-28's = button. 15