Nikon FSA02911 Instruction Manual - Page 94

Specifications Number of flashes and recycling times at full output (with batteries installed in the SB-28) Batteries 4 AA-type alkalinemanganese Min. recycling time (approx.) 6.5 sec. Min. number of flashes/ recycling time (approx.) 150/6.5-30 sec. 4 AA-type NiCd (700 mAh) 60/4-30 sec. 4 AA-type NiCd (1000 mAh) 4 sec. 90/4-30 sec. 4 AA-type Ni-MH 4 AA-type lithium 7.5 sec. 100/4-30 sec. 200/8-30 sec. Note: Data measured with fresh batteries, but without using AF assist LED, zoom-head position adjustment, or LCD panel illumination. Red-eye reduction AF assist illumination Ready-light FLASH button Built-in wide flash adapter Safety lock system LCD panel illuminator Flash shooting distance scale The red-eye reduction LED lights up for approx. 1 sec. before the flash fires. This function is set on the camera. Applicable to cameras in Group I (except F5) and Pronea 600i/6i. Automatically fires LED beam toward subject when performing autofocus in dim light or in the dark with Nikon AF cameras. Can be canceled. • Lights up when SB-28 is recycled and ready to fire. • Blinks for 3 seconds when flash fires at its maximum output, indicating light may have been insufficient (in TTL Auto Flash t and ˙ mode only). • Performs test firing for correct exposure detection in ˙ mode or test firing in " mode. Can turn the SB-28 on again after the unit enters standby mode. Allows the SB-28 to be used with 18mm or 20mm lenses. With cameras equipped with a safety lock system, the mount pin is automatically inserted into the locking hole in the camera's accessory shoe to secure the SB-28. Turns on and off every time the . button is pressed. Illumination lasts approx. 16 seconds. Distance scale on the LCD panel can be set to either meters (m) or feet (ft) by pressing the . and = buttons simultaneously with SB-28 turned off. 94