Nikon FSA02911 Instruction Manual - Page 21
Setting the built-in wide flash adapter
UPC - 018208047109
View all Nikon FSA02911 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Setting the built-in wide flash adapter The SB-28 comes with a wide flash adapter to increase the angle of coverage to match an 18mm or 20mm lens. 1 Slide out the wide flash adapter 1 and gently push it down into place in front of the flash head 2. • Because the bounce card comes out at the same time, return it 3 to its original position inside the flash head. • The zoom-head position indicator changes to 20mm and the indicator bars _ display the appropriate flash shooting distance range. 2 To change to 18mm, press the ' button once. -The zoom-head position indicator toggles between 18mm and 20mm each time you press the ' button. • To replace the wide flash adapter, lift it up and slide it back into its original place inside the flash head. If the built-in wide flash adapter is broken off accidentally, it is no longer possible to set 18 or 20mm. In this case, press the ' and [ buttons simultaneously for approx. 4 sec. until the zoom-head position indicator starts blinking, making it possible to adjust the zoom-head automatically or manually to its six basic settings (24, 28, 35, 50, 70, 85mm). 21