Nikon FSA02911 Instruction Manual - Page 32
Select the flash mode., Check the shooting distance., Wait for the ready-light to come on and make
UPC - 018208047109
View all Nikon FSA02911 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
TTL Auto Flash t Mode For cameras in Group II: F4-Series, F-801s/N8008s, F-801/ N8008, Pronea 600i/6i Flash settings 3 Select the flash mode. -Press the µ button until the desired auto flash mode indicator appears on the LCD panel: tø Matrix Balanced Fill Flash and Center-Weighted Fill Flash/Spot Fill-Flash t Standard TTL Flash 4 Check the shooting distance. A flash shooting distance range of 0.8 to 6m (2.6 to 20 ft) is shown. 5 Wait for the ready-light to come on and make sure the subject is in focus before taking the picture. • If the ready-light blinks for approx. 3 seconds after shooting, this indicates the light may have been insufficient for correct exposure. In this case, use a wider aperture or move closer to the subject. 32
3
Select the flash mode.
—Press the
µ
button until the desired auto flash mode indicator
appears
on the LCD panel:
tø
Matrix Balanced Fill Flash
and Center-Weighted
Fill Flash/Spot Fill-Flash
t
Standard TTL Flash
4
Check the shooting distance.
A flash shooting distance range
of 0.8 to 6m (2.6 to 20 ft) is shown.
5
Wait for the ready-light to come on and make sure the subject
is in focus before taking the picture.
• If the ready-light blinks for approx. 3 seconds after shooting, this indicates
the light may have been insufficient for correct exposure. In this case, use
a wider aperture or move closer to the subject.
32
TTL Auto Flash
t
Mode
Flash settings
For cameras in Group II: F4-Series, F-801s/N8008s, F-801/ N8008, Pronea 600i/6i