Nikon FSA02911 Instruction Manual - Page 41
Flash shooting distance range
![]() |
UPC - 018208047109
View all Nikon FSA02911 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Flash settings 1 Select the flash mode. -Press the µ button until t appears on the LCD panel. 2 Check the shooting distance. -Press the SB-28's { or } button until the aperture set on the lens is set on the SB-28's LCD panel, then confirm the flash shooting distance range. Flash shooting distance range 3 Wait for the ready-light to come on and make sure the subject is in focus before taking the picture. • If the ready-light blinks for approx. 3 seconds after shooting, this indicates the light may have been insufficient for correct exposure. In this case, use a wider aperture or move closer to the subject. 41
![](/manual_guide/products/nikon-fsa02911-instruction-manual-329b54c/41.png)
41
1
Select the flash mode.
—Press the
µ
button until
t
appears on the LCD panel.
2
Check the shooting distance.
—Press the SB-28's
{
or
}
button until the aperture set on the lens is set on
the SB-28's LCD panel, then confirm the flash shooting distance range.
Flash shooting distance range
3
Wait for the ready-light to come on and make sure the subject
is in focus before taking the picture.
• If the ready-light blinks for approx. 3 seconds after shooting, this indicates
the light may have been insufficient for correct exposure. In this case,
use a wider aperture or move closer to the subject.
Flash settings