Nikon FSA02911 Instruction Manual - Page 18
Setting the ISO film speed
![]() |
UPC - 018208047109
View all Nikon FSA02911 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Setting the ISO film speed Cameras in Groups I and II The ISO film speed is automatically set and indicated on the SB-28's LCD panel. • The usable film speed in TTL Auto Flash t mode is ISO 25 to 1000. Cameras in Groups III through VII Set the ISO film speed manually in this manner: 1 Turn the SB-28 off. 2 Turn it on again. The film speed starts blinking. 3 Press the { or } button to increase or decrease the film speed. -Press the [ button to stop the film speed from blinking. • The film speed indicator blinks during adjustment and stops after 8 seconds unless the [ button is pressed. The last blinking number is the one automatically set. • The following ISO film speeds can be used in TTL Auto Flash t mode : ISO 25 to 1000 for cameras in Groups III and IV, plus F-501/N2020 and F-301/N2000 cameras. ISO 25 to ISO 400 for cameras in Group VI, plus F-401s/N4004s and F-401/N4004 cameras. 18
![](/manual_guide/products/nikon-fsa02911-instruction-manual-329b54c/18.png)