Nikon FSA02911 Instruction Manual - Page 26
TTL Auto Flash
![]() |
UPC - 018208047109
View all Nikon FSA02911 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
TTL Auto Flash t Mode For cameras in Group I: F5, F100, F90X/N90s, F90-Series/N90, F80-Series/N80-Series, F70-Series/N70 Available flash operation in TTL Auto Flash t Mode Lens in use Available flash operation*1 Camera's exposure mode Camera's metering system*2 D- or G-type*3 Nikkor lenses 3D Multi-Sensor Balanced Fill-Flash tØ Desired mode Desired metering system Non-D/G-type AF Nikkor lenses/ AI-P lenses Other Nikkor lenses*4 Multi-Sensor Balanced Fill-Flash tØ Center-Weighted Fill-Flash/Spot FillFlash tø Desired mode Aperture-priority auto (A) Desired metering system Center-Weighted Metering Manual (M) Spot Metering*2 *1 All of the above flash modes can be changed to Standard TTL Flash t. *2 Only Standard TTL Flash is possible when the F5's, F100's or F80-Series/N80-Series' Metering System is set to Spot Metering. *3 With a G-type Nikkor lens attached to F90X/N90s, F90-Series/N90, F70-Series/N70 cameras, the A and M exposure modes cannot be used. *4 With a non-CPU Nikkor lens attached to F80-Series/N80-Series cameras, Standard TTL Flash can be performed. (Can only be used with exposure mode set to Manual) The camera's exposure meter cannot be used. Set and confirm the aperture using the lens aperture ring. Monitor Preflash will not operate: • If the flash head is tilted up or rotated from the horizontal/front position. • When the camera's flash sync mode is set to rear-curtain sync. • When TTL Auto Flash (not 3D Multi-Sensor Balanced Fill-Flash or Multi- Sensor Balanced Fill-Flash) mode is selected. (In this case no Ø indicator appears.) • When a Nikkor lens without a built-in CPU is used. Camera settings 1 Set the aperture. -The method for setting the aperture differs, depending on the lens in use and the selected exposure mode. (See page 29, Confirming flash shooting distance range in TTL Auto Flash t Mode.) 2 Set the flash sync mode. -Set the camera's flash sync mode (if available) to front-curtain sync (Normal). 26
![](/manual_guide/products/nikon-fsa02911-instruction-manual-329b54c/26.png)