Nikon FSA02911 Instruction Manual - Page 34

Nikkor lenses with a built-in CPU, Nikkor lenses without a built-in CPU

Get Nikon FSA02911 - SB 28 - Hot-shoe clip-on Flash PDF manuals and user guides
UPC - 018208047109
View all Nikon FSA02911 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

TTL Auto Flash t Mode For cameras in Group III: F-601/N6006, F-601M/N6000 Flash settings 4 Select the flash mode. -Press the µ button until t appears on the LCD panel. • Set your camera to the Matrix Balanced Fill Flash or CenterWeighted Fill-Flash/Spot Fill-Flash mode. 5 Check the shooting distance. A flash shooting distance range of 0.8 to 6m (2.6 to 20 ft) is shown. Nikkor lenses with a built-in CPU • In any exposure mode: -Press the { or } button until the same aperture as displayed on the camera's LCD panel or in viewfinder is set on the SB-28's LCD panel, then confirm the flash shooting distance range. Nikkor lenses without a built-in CPU • In Aperture-priority auto (A) or Manual (M) mode only: -Press the { or } button until the same aperture on the lens is set on the SB-28's LCD panel, then confirm the flash shooting distance range. 6 Wait for the ready-light to come on and make sure the subject is in focus before taking the picture. • If the ready-light blinks for approx. 3 seconds after shooting, this indicates the light may have been insufficient for correct exposure. In this case, use a wider aperture or move closer to the subject. 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
4
Select the flash mode.
—Press the
µ
button until
t
appears on the LCD panel.
• Set your camera to the Matrix
Balanced Fill Flash or Center-
Weighted Fill-Flash/Spot Fill-Flash
mode.
5
Check the shooting distance.
A flash shooting distance range
of 0.8 to 6m (2.6 to 20 ft) is shown.
Nikkor lenses with a built-in CPU
• In any exposure mode:
—Press the
{
or
}
button until the same aperture as displayed on the
camera’s LCD panel or in viewfinder is set on the SB-28’s LCD panel, then
confirm the flash shooting distance range.
Nikkor lenses without a built-in CPU
• In Aperture-priority auto (A) or Manual (M) mode only:
—Press the
{
or
}
button until the same aperture on the lens is set on the
SB-28’s LCD panel, then confirm the flash shooting distance range.
6
Wait for the ready-light to come on and make sure the subject
is in focus before taking the picture.
• If the ready-light blinks for approx. 3
seconds after shooting, this indicates
the light may have been insufficient
for correct exposure. In this case,
use a wider aperture or move closer
to the subject.
34
TTL Auto Flash
t
Mode
Flash settings
For cameras in Group III: F-601/N6006, F-601
M
/N6000